5.1. Separate the upper and lower
bodies.
1. Remove the attachment nozzle and cover fitted to the rear
of the body.
2. Remove the screw fixing the body cover and remove the
body cover.
3. Open the dust cover assembly and remove the grip.
4. Turn the body over and remove the two screws at the rear
fixing the upper and lower bodies.
* These are special screws. Use a TORX screwdriver.
(If there are no TORX screwdrivers, then use a thin flat-
blade screwdriver that fits the screw slot.)
5. Turn the body over again for normal positioning. Open the
dust cover assembly and remove the four screws fixing the
upper and lower bodies.
6. Lift the upper body to separate it from the lower body.
5 How to replace major components
Important notice: Before replacing any components, make sure to turn OFF the vacuum cleaner.
Remove the power plug from the outlet.
7
MC-E7111-AE79 / MC-E7111-AE7A / MC-E7111-RE79 / MC-E7111-RW79 / MC-E7111-AW79 / MC-E7113-RE79 / MC-E7113-RW79
