4
Please read the safety instructions (P.
3
) before using this cleaner.
CAUTIONS
●
The plug must be removed from the socket outlet before cleaning or maintaining the appliance.
●
DO NOT use hot air or hot surface to dry the fi lter. Dry it at room temperature for approximately 24 hours.
●
IMPORTANT: Before re-installing the washable fi lter, make sure it is completely dry to avoid damaging the appliance.
●
DO NOT use the telescopic wand or the extension wand when using the blower operation. Wand will get hot.
Suction regulator
1
Start operation
Press
Hose
Plug
Power
cord
Cloth dust bag
(in body)
Release pedal
Alternative nozzles
Crevice nozzle
:
For narrow gaps, etc.
Dusting brush
:
For furniture,venetian
blinds, etc.
Dust indicator
Turn the power control to the highest setting
and lift the nozzle off the fl oor.
If the dust indicator turns red, the cloth dust bag
is full and requires replacing the cloth dust bag.
Dust cover
ON/OFF Switch
pedal
Telescopic wand
To increase or decrease the power,
slide the variable power control .
Variable
Power
control
Press the mark, not
the edge of the pedal.
Cord rewind pedal
Press the mark,
not the edge of
the pedal.
Blower
Release
pedal
How to use 3D EZ Nozzle
(MC-CJ919)(MC-CJ917)(MC-CJ915)
Changing the
cleaning power.
EZ Crevice
For narrow gaps, etc.
EZ Upholstery
For sofa, etc.
Remove the floor nozzle by pressing the
release pedal and you can use EZ Crevice or
EZ Upholstery easily anytime.
Floor nozzle
(3D EZ Nozzle)
Floor nozzle
(Durable 2-step nozzle)
Connect the two extension
wands by inserting one
into the other and twisting
together.
•
MC-CJ913
•
MC-CJ911
Carpet
Parquet /
Bare fl oor
2
Adjust the nozzle
to suit the fl oor
Carpet
Parquet /
Bare fl oor
Length may be
adjusted.
Use when strong
suction causes the
nozzle to stick to the
fl oor, hindering
movement.
•
MC-CJ919
•
MC-CJ917
•
MC-CJ915
•
MC-CJ911
•
MC-CJ919
•
MC-CJ917
•
MC-CJ915
•
MC-CJ913
•
MC-CJ911
Extension wand
•
MC-CJ913
Connect the edge of the hose and the upper end of the telescopic wand
by inserting one into the other and twisting together.
Attach the fl oor nozzle to the other end
while aligning the raised section with the hole.
(When removing them , push the tab down while
pulling on the telescopic wand.)
Insert the hose unit into the upper end of the telescopic wand or
the extension wand, and the fl oor nozzle to the other end.
•
MC-CJ913
•
MC-CJ911
•
MC-CJ919
•
MC-CJ917
•
MC-CJ915
First, assemble the parts together.
Parts are set surely so as not to come off.
For locations where the nozzle will not enter,
connect the hose to the blower and blow the dust out.
Turn off the appliance,
release the connection
pipe from hose inlet.
Connect the hose to
the blower.
Turn off the appliance,
connect the connection
pipe to the hose inlet.
After this, turn on the
appliance and clean the
dust.
Turn on the appliance and
blow the dust out.
How to use Blower
Connection pipe
Hose inlet
Step 1
Step 2
Step 3
•
MC-CJ915
•
MC-CJ917
•
MC-CJ919
ENGLISH
