background image

© Panasonic Corporation 2009 Unauthorized copy-
ing and distribution is a violation of law.

Order Number VCB0910009CE

Vacuum Cleaner

Model No.

MC-CG882-SC79

Product Color :Royal Silver
Destination

:Europe

TABLE OF CONTENTS

PAGE

PAGE

1 Specifications

-----------------------------------------------------

2

2 Location of Controls and Components

-------------------

3

3 Troubleshooting Guide

-----------------------------------------

4

4 Disassembly and Assembly Instructions

----------------

5

4.1. Remove the Dust cover assy. -------------------------- 5
4.2. Remove the Rear cover unit, Switch cover,

and the Pedal cover. -------------------------------------- 5

4.3. Remove the Upper body unit and Lower body

unit.------------------------------------------------------------ 6

4.4. Remove the Cord reel partition unit. ------------------ 7
4.5. Remove the P.C.B. A Unit. ------------------------------ 8
4.6. Remove the Motor. ---------------------------------------- 9

5 Wiring Connection Diagram

---------------------------------

11

6 Exploded View and Replacement Parts List

-----------

12

6.1. EXPLODED VIEW (ATTACHMENTS) --------------12
6.2. PARTS LIST (ATTACHMENTS) ----------------------12
6.3. EXPLODED VIEW (BODY UNIT) --------------------13
6.4. PARTS LIST (BODY UNIT) ----------------------------14

6.5. PACKING INSTRUCTIONS --------------------------- 16
6.6. PACKING LIST ------------------------------------------- 17

Содержание MC-CG882-SC79











Отзывы: