background image

© Panasonic Corporation 2009 
Unauthorized copying and distribution is a violation
of law.

Order Number VCB0902002CE

Vacuum Cleaner

Model No.

MC-CG691-RA76
MC-CG691-RC79
MC-CG691-RC7A
MC-CG691K-RP47

Product Color :Burgundy Red
Destination

:Europe

TABLE OF CONTENTS

PAGE

PAGE

1 Specifications

-----------------------------------------------------

2

2 Location of Controls and Components

-------------------

3

3 Troubleshooting Guide

-----------------------------------------

4

4 Disassembly and Assembly Instructions

----------------

5

4.1. Dust box lid U removal ----------------------------------- 5
4.2. Separate the upper and lower body units ----------- 5
4.3. Separate the cord reel U and the body

partition U---------------------------------------------------- 6

4.4. Printed Circuit Board (PCB) AU removal ------------ 7
4.5. Motor removal ---------------------------------------------- 8

5 Wiring Connection Diagram

----------------------------------

9

6 Exploded View and Replacement Parts List

-----------

10

6.1. EXPLODED VIEW (ATTACHMENTS) --------------10
6.2. PARTS LIST (ATTACHMENTS) ----------------------10
6.3. EXPLODED VIEW (BODY UNIT) -------------------- 11
6.4. PARTS LIST (BODY UNIT) ----------------------------12
6.5. PACKING INSTRUCTIONS----------------------------13
6.6. PACKING LIST--------------------------------------------14

Содержание MC-CG691-RA76









Отзывы: