Panasonic MC-CG691-RA76 Скачать руководство пользователя страница 7

Страница: 7 / 8

4.4.

Printed Circuit Board (PCB) AU
removal

1. Remove the control terminal U, the power control and the

switch from the motor support cover U.

2. Remove the four screws affixing the motor support cover

3. Remove the motor support cover U and remove the PCB

AU.

4. Disengage the fast-on terminals of the two lead wires

connecting the PCB AU.

*Note:

When disengaging the fast-on terminals, pull straight

out without lateral movement while holding down the

lock release.

Содержание MC-CG691-RA76

Страница 2: ...1K Power source AC230V 50Hz AC240V 50Hz Input power MAX 1300W Power control O Extension wand Telescopic Floor nozzle O Dimensions W x L x H 300 440 235 Cord length 5 0m Net weight 5 0kg Attachments cleaning tools Crevice nozzle Upholstery nozzle ...

Страница 3: ...3 2 Location of Controls and Components ...

Страница 7: ...ort cover U 2 Remove the four screws affixing the motor support cover U 3 Remove the motor support cover U and remove the PCB AU 4 Disengage the fast on terminals of the two lead wires connecting the PCB AU Note When disengaging the fast on terminals pull straight out without lateral movement while holding down the lock release ...

Страница 8: ... front 3 Remove the motor support front from the motor unit 4 Remove the motor support rubber front from the motor unit 5 Remove the noise suppressor U from the motor unit 6 Remove the two lead wires from the motor unit Note Make sure that the thermal protector is on the under side when setting the assembled motor into the lower body ...