background image

© 2008 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.

Order No.VCB0803005CE

Vacuum Cleaner

Model No.

MC-CG383-RC79
MC-CG383-RW79
MC-CG383K-RP47

Product Color :Sporty red
Destination

:Europe

TABLE OF CONTENTS

PAGE

PAGE

1 Specifications

-----------------------------------------------------

2

2 Location of Controls and Components

-------------------

3

3 Troubleshooting Guide

-----------------------------------------

5

4 Disassembly and Assembly Instructions

----------------

6

4.1. Dust box cover assembly removal -------------------- 6
4.2. Separate the upper and lower body units ----------- 6
4.3. Removal of the cord reel U------------------------------ 7
4.4. Removal of the P.C.B. ass’y and motor -------------- 8

5 Wiring Connection Diagram

---------------------------------

10

6 Exploded View and Replacement Parts List

-----------

11

6.1. EXPLODED VIEW (ATTACHMENTS) --------------11
6.2. PARTS LIST (ATTACHMENTS) ----------------------12
6.3. EXPLODED VIEW (BODY UNIT) --------------------13
6.4. PARTS LIST (BODY UNIT) ----------------------------14
6.5. PACKING INSTRUCTIONS----------------------------15
6.6. PACKING LIST--------------------------------------------16

Содержание MC-CG383-RC79










Отзывы: