52
SQT0359 (ENG)
Advanced Recording Functions
You can switch the operation to be performed when you press the shutter
button.
1
Press [
] button ( )
2
Press to select the drive mode and press [MENU/SET]
[Single]
When the shutter button is pressed, only one
picture is recorded.
[Burst] (
→
53)
The pictures are recorded in succession while
the shutter button is pressed.
[Auto Bracket]
∗
(
→
54)
Each time the shutter button is pressed, the
pictures are recorded with different exposure
settings based on the Exposure Compensation
range.
[Aspect Bracket]
∗
(
→
54)
When the shutter button is pressed, 4 pictures
with 4 different aspect ratios are automatically
recorded.
[Self Timer] (
→
55)
When the shutter button is pressed, recording
takes place after the set time has elapsed.
[Panorama
Shot]
∗
(
→
55)
The pictures are recorded in succession while
you press the shutter button and move the
camera horizontally or vertically, and then the
camera combines the pictures into a single
panorama picture.
∗
Cannot be set when using [Intelligent Auto] Mode.
• The icons in the above table are just examples.
• To cancel drive mode, select [
] ([Single]) or [
]. The recording is
switched to “Single”.
• When you press , you can change the settings of each drive mode.
Note, however, that you cannot change the settings of [Single] and
[Aspect Bracket].
Selecting a Drive Mode
