Menu Settings
77
VQT0W82
∫
Adjusting each film mode to the
desired setting
1
Press
1
several times on the
screen shown in step
2
on
page 76.
2
Press
3
/
4
to select an item, use
the command dial
A
to adjust it
and then press [MENU/SET].
• The message [SAVE THIS
SETTINGS?] appears.
3
Press
3
/
4
to select the item and
then press [MENU/SET].
• You can save 2 user settings ([MY
FILM1] and [MY FILM2]).
• [FILM MODE] is displayed as [TEMP.]
on the LCD monitor if you select [NO,
USE AS TEMP. SET]. The display
disappears and the setting is canceled
if the camera is turned off and then on
again.
4
Press [MENU/SET] to close the
menu.
• Noise may become visible when you take
pictures in dark places. To avoid picture
noise, we recommend setting
[NOISE RED.] in [ADJUST.] towards [
_
]
or setting the items except [NOISE RED.]
towards [
`
] to take pictures.
• You cannot adjust [SATURATION] in the
black and white settings in film mode.
SET
MENU
A
SHARPNESS
SATURATION
NOISE RED.
ADJUST.
STANDARD
CANCEL
SELECT
SET
MENU
CONTRAST
ADJUST.
SELECT
SET
MENU
SAVE THIS SETTING ?
OVERWRITE MY FILM 1
OVERWRITE MY FILM 2
NO,USE AS TEMP. SET
SET
MENU
[CONTRAST]
[
_
]
Increases the difference between
the brightness and the darkness
in the picture.
[
`
]
Decreases the difference
between the brightness and the
darkness in the picture.
[SHARPNESS]
[
_
]
The picture is sharply defined.
[
`
]
The picture is softly focused.
[SATURATION]
[
_
]
The colors in the picture become
vivid.
[
`
]
The colors in the picture become
natural.
[NOISE RED.]
[
_
]
The noise reduction effect is
enhanced. Picture resolution may
deteriorate slightly.
[
`
]
The noise reduction effect is
reduced. You can obtain pictures
with higher resolution.
