231
Motion Picture
Applicable modes:
1
Start recording by pressing the motion
picture button.
A
Elapsed recording time
B
Available recording time
•
Recording of motion picture appropriate for each mode is
possible.
•
The recording state indicator (red)
C
will flash while
recording motion pictures.
•
If approximately 1 minute elapses without an operation
being performed, part of the display will disappear. Press
[DISP.] or touch the monitor to make the display
reappear.
•
When recording a motion picture, do not cover the
microphone with your fingers or other objects.
•
Release the motion picture button right after you press it.
2
Stop the recording by pressing the motion picture button again.
•
Still picture recording is also possible during the motion picture recording by fully
pressing the shutter button.
(P233)
Recording Motion Picture
Enabling/disabling the motion picture button
[MENU]
>
[Custom]
>
[Video Button]
>
[ON]/[OFF]
•
This function is for preventing accidental operation of the button.
Switching between the angle of view for taking pictures and the one for
recording motion pictures
[MENU]
>
[Custom]
>
[Rec Area]
>
[
!
]
(Picture)/[
] (Motion picture)
•
When the aspect ratio setting is different in still and motion pictures, the angle of view
changes at the start of motion picture recording. When [Rec Area] is set to [
], angle of
view during motion picture recording is displayed.
•
The recording area indicated is an approximation.
R
1
m
37
37
s
R
1
m
37
s
3
s
3
s
3
s
C
B
A
