- 212 -
Others
•
When recording under fluorescent or LED lighting fixture etc., increasing the shutter speed may
introduce slight changes to brightness and color. These are a result of the characteristics of the light
source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting, LED
lighting fixture, mercury lamp, sodium lighting etc., the colors and screen brightness may change or
horizontal striping may appear on the screen.
•
This is characteristic of MOS sensors which serve as the camera’s pickup
sensors. It appears when the subject has a bright part. Some unevenness
may occur in the surrounding areas, but this is not a malfunction.
It is recorded in pictures or motion pictures.
•
It is recommended that you take pictures while taking care not to expose
the screen to sunlight or any other source of strong light.
•
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
•
Depending on the type of the card, recording may stop in the middle.
>
If motion picture recording stops during use of a card of at least “Class 4” or if you use a card
that has been formatted on a PC or other equipment, the data-writing speed is lower. In such
cases, we recommend that you make a backup of the data and then format
(P68)
the card in this
unit.
•
Object seems to be warped slightly when the object moves across the image very fast, but this is
because the unit is using MOS for the image sensor. This is not a malfunction.
•
Is the [Conversion]
(P145)
set to [
] or [
]?
•
Has [Side Lever]
(P57)
been set to [FOCUS]?
>
Set [Side Lever] to [ZOOM].
•
Set the AF area to the distinctive color of the subject if there is a part that is different from the
surrounding color.
(P95)
The brightness or the hue of the recorded picture is different from the actual scene.
Reddish horizontal streaks appear on the LCD monitor during recording.
Motion picture recording stops in the middle.
Object seems to be warped.
Zoom does not operate properly.
(DMC-FZ200)
The zoom cannot be controlled with the side lever.
Subject cannot be locked.
(AF tracking not possible)
C
