![background image](http://html.mh-extra.com/html/panasonic/lumix-dc-fz1000m2/lumix-dc-fz1000m2_owners-manual_1510305313.webp)
313
Others
Q&A Troubleshooting
■
Monitor/viewfinder
The monitor/viewfinder is turned off although the camera is turned on.
• If no operations are performed during the set time period [Auto LVF/Monitor Off]
(→
is
activated, and the monitor/viewfinder turns off.
• When a hand or an object is close to the eye sensor, the monitor display mode could be switched
to viewfinder display mode.
(→
It may flicker for an instant or the brightness of the screen may change significantly for an
instant.
• This occurs due to the aperture of the lens changing when the shutter button is pressed halfway, or
when the brightness of the subject changes. This is not a malfunction.
Cannot switch between the monitor and viewfinder when pressing [LVF] button.
• When it is connected to a computer or printer, the camera can display pictures on the monitor only.
The color tone of the viewfinder differs from the actual tone.
• Being a characteristic of the viewfinder of this unit, this phenomenon is not a problem. Recorded
images are not affected.
■
Playback
Cannot view pictures. There are no recorded pictures.
• A card is not inserted in the camera.
• Has the file name of the picture been changed on a computer? If so, it cannot be played back on
the camera.
→
It is recommended to use the “PHOTOfunSTUDIO” software
(→
to write pictures from PC
to card.
• Set [Playback Mode] to [Normal Play].
(→
Red areas in pictures appear blackened.
• When the digital red-eye correction ([
], [
]) is operating, red areas may be blackened.
→
We recommend closing the built-in flash, setting the flash mode to [ ], or setting [Red-Eye
Removal] to [OFF] before recording.
(→