Panasonic LQ-DRM200 Скачать руководство пользователя страница 63

Страница: 63 / 70

Troubleshooting guide (continued)

Sound

Displays

Play

No sound.
Low volume.
Distorted sound.

≥

Check the connections. (page 11)

≥

Check the input mode on the amplifier if you have connected one. (pages 47, 48 and 55)

≥

Turn V.S.S. OFF if it causes distortion. (page 39)

Cannot hear the desired audio
type.

≥

Press [AUDIO]

(36)

on the remote control to select the desired audio type. (page 16)

≥

Go to Sound in the SETUP menus and choose the correct setting with “Bilingual Audio
Selection”.

[DVD-R]

(page 53)

≥

If “D.MIX” does not appear in the display when playing multi-channel DVD-Audio, audio output
will be the front two speakers only. (page 5)

≥

You cannot change the DVD-Audio audio type if the software producer has restricted play in
stereo.

≥

It is not possible to switch the audio when the recording mode is XP and “LPCM” has been
selected in the SETUP menu, “Audio Mode for XP Recording”. (page 53)

≥

You have used digital connection. Connect to other equipment using audio cables (analog
connection). (page 48)

≥

You cannot change the audio type when using DVD-R.

The display is dim.

≥

Go to Display in the SETUP menus and change the display’s brightness with “FL Display”.
(page 53)

“0:00” is flashing on the unit’s
display.

≥

The clock is not set.
Go to Settings in the SETUP menus and set the clock with “Clock”. (page 56)

“NO READ” appears on the unit’s
display after using a lens cleaner.

≥

Take the cleaner out of the unit.

Play fails to start even when [

]

(26)

is pressed.

Play starts but then stops
immediately.
“NO READ”, “UNSUPPORT”, “NO
DISC” or “NO PLAY” appears on
the unit’s display.

≥

Insert the disc correctly with the label facing up. (page 13)

≥

This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Audio, DVD-Video, Video CD,
CD and MP3 disc. (page 8)

≥

The disc is dirty. Clean it. (page 58)

≥

The disc may be badly scratched. (page 58)

≥

You inserted a blank DVD-RAM or DVD-R.

No response when buttons
pressed.

≥

If “

” appears on the television the operation is prohibited by the unit or disc.

≥

If the unit is not operating at all, press [

, TIMER]

(14)

to switch the unit to standby, then press

[

, TIMER]

(14)

again to turn the unit on. The unit may not be operating correctly due to

lightning, static electricity, or some other external factor.

≥

The Child Lock function is activated. (page 47)

A title or chapter doesn’t play
when it is selected.

≥

Some titles and chapters on DVD-Video are not played when you have changed the ratings
level. (page 54)

Picture distorted during search.

≥

Some distortion is normal.

Alternative soundtrack and
subtitles cannot be selected.

≥

The languages are not recorded on the disc.

≥

You may have to use the disc’s own menus to select languages.

Soundtrack/subtitle language is
different from the one selected
with the SETUP menus.

≥

The language is not recorded on the disc. (page 52)

No subtitles.

≥

Subtitles are not recorded on the disc.

≥

Turn the subtitles on. (page 38)

Angle cannot be changed.

≥

This function depends on software availability. Angles can only be changed during scenes where

different angles are recorded (“

” appears on the display).

You have forgotten your ratings
password.

≥

Return the unit's settings to the initial state (factory setting).
With the tray open, keep pressing [

] and [

]

(47)

on the main unit

simultaneously for 5 or more seconds.

E60TEG.book 63 ページ２００３年９月１日月曜日午後５時６分

Содержание LQ-DRM200







































































Результаты поиска

Содержание LQ-DRM200

Отзывы:

Бренды по названию

Популярные бренды

Panasonic LQ-DRM200, Руководство по эксплуатации

Результаты поиска

Содержание LQ-DRM200

Отзывы:

Бренды по названию

Популярные бренды