Panasonic LQ-DRM200, Руководство по эксплуатации

Страница: 56 / 70

56
Changing the unit’s settings (continued)
Operating other Panasonic DVD
equipment with the remote control
By changing the remote control code, you can operate other DVD
recorders and players manufactured by Panasonic.
Most of the DVD recorders and players manufactured by
Panasonic use the same system for their remote controls, so if you
operate them in the same place, the controls can be confused by
the different pieces of equipment. Use the following procedure to
change the remote control code to solve this problem.
≥
Use “1”, the factory set code, under normal circumstances.
Preparation
≥
Switch [DVD, TV]
(19)
to “DVD”.
Press [ENTER]
(10)
and the numeric buttons
(4)
corresponding to the code you want to set, [1], [2] or
[3], at the same time for about 2 seconds or more.
Note
≥
Be sure to set the same remote control code on the main unit as
you did for the remote control itself (page 52, “Settings”—
“Remote”).
≥
The following display appears on the unit’s display if its code and
the remote control’s code are different. Change the remote
control’s code to suit the unit.
The unit’s remote control code
≥
The display disappears after about 5 seconds.
Clock Settings
Preparation
≥
Switch [DVD, TV]
(19)
to “DVD”.
1
Press [SETUP]
(35)
to show the SETUP window.
2
Use [
3
,
4
]
(10)
to select the “Settings” tab and
press [
2
] or [
1
]
(10)
.
3
Use [
3
,
4
]
(10)
to select “Clock” and press
[ENTER]
(10)
.
4
Use [
2
,
1
]
(10)
to select the item you want to
change.
≥
The items change as follows:
Hour
()
Minute
()
Second
()
Day
()
Month
()
Year
^ ----------------------------------------------------------------------------------------J
5
Use [
3
,
4
]
(10)
to change the setting and press
[ENTER]
(10)
.
≥
You can also use the numeric buttons
(4)
for setting.
6
Press [SETUP]
(35)
.
Note
In the event of a power failure, the clock will operate on its back up
system for a minimum of 3 years.
Shipping Condition
The all settings in the SETUP screen return to the factory settings.
(except for the ratings level and the password)
Preparation
≥
Switch [DVD, TV]
(19)
to “DVD”.
After performing steps 1 to 2 of “Clock Settings”, perform the
following steps:
3
Use [
3
,
4
]
(10)
to select “Shipping Condition” and
press [ENTER]
(10)
.
4
Use [
2
,
1
]
(10)
to select “Yes” and press [ENTER]
(10)
.
5
Use [
2
,
1
]
(10)
to select “Yes” and press [ENTER]
(10)
.
Tab SELECT
Remote
Settings
SETUP
RETURN
Picture
Disc
Sound
Display
Connection
Clock
Shipping Condition
DVD 1
Clock
Time: Date:
15 : 45 : 39 1 . 8 . 2003
ENTER
RETURN
CHANGE
Please set the clock.
ENTER : access , RETURN : leave
SELECT
0 9
No.
Yes No
ENTER
RETURN
Settings
SETUP
Disc
Picture
Sound
Display
Connection
Shipping Condition
Warning—all data will be set to
factory settings !
Do you want to proceed ?
E60TEG.book 56 ページ ２００３年９月１日 月曜日 午後５時６分