Panasonic LP-M Series, Руководство по обслуживанию

Страница: 17 / 174

17
For the Safety Use of Laser Product
This product falls into Class 4 laser (marking laser) and Class 2 laser (guide laser) based on the classifications of “Safety
of laser products” IEC 60825-1. Perform the safety protection measure before using the system. Refer to “Safety protection
measures for users” (P.19) for details.
Radiation information
„
Marking laser (class 4)
Class 4 laser refers to “Laser products for which intrabeam viewing and skin exposure is hazardous and for which the
viewing of diffuse reflections may be hazardous. These lasers also often represent a fire hazard.”
Item LP-M200 LP-M205 LP-M500 LP-M505 LP-MA00 LP-MA05 LP-MA06 Remarks
Wavelength 1064 nm Invisible beam
Laser medium Yb: FIBER ―
Max. output *1 40 W 90 W 200 W ―
Mode of
operation
Pulsed ―
Pulse cycle 2 μs to 50 μs 2 μs to 20 μs 5 μs to 10 μs ―
Pulse duration *2 1 ns to 1000 ns ―
Class Class 4 (IEC 60825-1) ―
NOHD *3
Approx.
47 m
Approx.
45 m
Approx.
70 m
Approx.
67 m
Approx.
103 m
Approx.
99 m
Approx.
131 m
Nominal ocular
hazard distance
MPE *4 47.3 W/m
2
Maximum
permissible
exposure
NHZ
NHZ represents the area where the amount of beam irradiance or radiant
exposure exceeds the maximum permissible exposure to eyes. It is equal of
NOHD at a maximum.
NHZ varies depending on the reflectance or surface condition of works. Please
calculate it based on the actual working environment.
Nominal hazard
zone
*1 : The maximum output power means the maximum value of output that can be output from a laser oscillator itself.
Refer to “1-3 Specification” (P.30) for details of average output.
*2 : The pulse duration means the available output range from the laser oscillator itself.
*3 : “NOHD” means the distance that the area where the amount of beam irradiance or radiant exposure becomes equal to
the maximum permissible exposure to eyes.
*4 : MPE in this table is a value calculated with exposure time set to 10 seconds.
„
Guide laser pointer (class 2)
The laser classified into the Class 2 refers to “Laser products that emit visible radiation in the wavelength range from 400
nm to 700 nm that are safe for momentary exposures but can be hazardous for deliberate staring into the beam.”
Item LP-M series Remarks
Wavelength 655 nm Visible beam
Laser medium Semiconductor laser -
Max. output *1 1 mW -
Mode of operation CW -
Class Class 2 (IEC 60825-1) -
*1: Sum of the guide laser and pointer values.
ME-LPM-SSM-10