Panasonic Lamdash ES-BST6Q, Руководство по эксплуатации

Страница: 10 / 72

10
English
Charging the shaver
•Turn the shaver off.
•Attach the carrying holder so as not to scratch the system outer foil.
•Wipe off any water droplets on the appliance socket and the
charging stand.
1
1
Insert the appliance plug
into the shaver�
2
2
Plug in the adaptor into a
household outlet�
•Charging is completed after
approx. 1 hour.
The charging time may differ with
the charging capacity.
1
2
3
3
Disconnect the adaptor after charging is completed�
•Charging the battery for more than 1 hour will not affect
battery performance.
Note
You cannot operate the shaver while charging.
While charging
After charging is
completed
Abnormal charging
The charge status
lamp ( ) glows red.
The charge status
lamp ( ) turns off.
The charge status
lamp ( ) will blink
twice every second.
•After charging is completed, turning the power switch ON with
the shaver plugged in will cause the charge status lamp ( ) to
light up and then turn off after 5 seconds.
This shows that the shaver is fully charged.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charging time may
change or the charge status lamp ( ) may not glow for a few
minutes. It will eventually glow if kept connected.
•Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge or the battery may
fail to charge properly in extremely high or low temperatures.
The charge status lamp ( ) will blink twice every second when
there is a problem with charging.
Charge the shaver within the recommended ambient
temperature range.
•The shaver can be used for approximately 2 weeks with a full
charge. (Based on one 3‑minute dry‑shave usages per day in an
ambient temperature range of 20 °C – 30 °C.)
The number of usable days varies depending on the following
conditions.
‑Beard thickness
‑Pressure applied to the skin
‑Usage of wet shaving
‑Usage in shaving foam mode
•If there is noise from the radio or other sources while using or
charging the appliance, move to a different location to use the
appliance.