EN-
20
EN-
21
English
Brings a pan of water to the boil.
Available on the cooking zone with
.
1. Select the cooking zone required.
2. Touch Autoboil Mode key (
).
The appliance beeps 5 times when the water
reaches boiling point and maintains a rolling boil.
After beeping add ingredients and adjust the
heating power with the slider as required.
Autoboil Mode
IH Cooking
NOTE
■
The cookware size and material (e.g. non-stick coating) and the
volume of water may affect the sensor detection. If the water has not
boiled after beeping or it has boiled but the appliance does not beep,
select a power level as required.
■
Cooking Timer can be used with Autoboil Mode.
(See page 25)
Autoboil Mode is developed for boiling water only.
To achieve the optimum performance, the following is
recommended.
■
Use a lid until boiling.
■
Use a minimum of 0.5 L of water. If a larger pan that
covers 3 or more areas of flex cooking zone, use a
minimum of 1 L of water.
■
Minimum 1 cm of depth when flex cooking zone is
used.
In order to prevent water boiling over from the pan, the
following is recommended.
■
No more than 70% pan capacity should be used.
■
There should be a minimum gap of 3 cm between
the lid and the water surface.
Min. 0.5 L / 1 L
Min. 3 cm
3. Turn off the cooking zone.
(See page 17)
Low Temperature Cooking Mode
Available on the cooking zone with
.
1. Select the cooking zone required.
2. Touch Sensor Option key (
) once
to select
Low Temperature Cooking.
3. Touch Low Temperature Cooking Mode key (
).
4. Touch slider
to set the required temperature.
Temperature adjustable range: 65
o
C to 120
o
C.
See Genius Sensor Cooking Chart on page 28.
5. When the set temperature is reached, the
temperature display stops flashing
and the
appliance beeps 5 times.
- When Low Temperature Cooking Mode is used
after cooking with high power, the temperature
display stops flashing when the set temperature is
reached but the appliance does not beep.
6. Turn off the cooking zone.
(See page 17)
IH Cooking
NOTE
Temperature ‘100’ will flash in the display until the
boiling temperature is reached. After the water is
boiled, the appliance automatically sets the power
level to “7”. Increase or decrease the power level as
required.
NOTE
■
Due to the variety of food types and pans, the actual temperature of
food may be different from the set temperature. Increase or decrease
the setting until the required food temperature is achieved.
■
Cookware with a non-stick coating may affect the sensor detection.
Adjust the set temperature until the required temperature is achieved.
■
To achieve the optimum performance, it is recommended that the
following minimum amount is heated at any one time with Low
Temperature Cooking Mode.
■
Minimum 1 cm of depth when flex cooking zone is used.
■
Due to the consistency of milk it is recommended to stir continuously
when heating, to prevent the milk from sticking to the bottom of the
pan and burning.
■
Cooking Timer can be used with Low Temperature Cooking Mode.
(See page 25)
-
Water / milk: 200
g
-
Any other food
types: 400
g
-
All liquid and food
types: 400
g
