Answering System
35
For assistance, please visit http://www.panasonic.com/help
1
{
MENU
}
(center of joystick)
i
{#}{
2
}{
1
}{
1
}
2
{V}
/
{^}
: Select the desired setting.
i
{
SAVE
}
i
{
OFF
}
For voice mail service subscribers
If you subscribe to a flat-rate service
package that includes Caller ID, call
waiting, voice mail, and unlimited
local/regional/long distance calls, please
note the following:
L
To use the voice mail service provided
by your service provider/telephone
company rather than the unit’s
answering system, turn off the
answering system (page 30).
L
To use this unit’s answering system
rather than the voice mail service
provided by your service provider/
telephone company, please contact
your service provider/telephone
company to deactivate your voice mail
service.
If your service provider/telephone
company cannot do this:
– Set this unit’s
“
Ring count
”
setting so that this unit’s answering
system answers calls before the
voice mail service of your service
provider/telephone company does.
It is necessary to check the number
of rings required to activate the
voice mail service provided by your
service provider/telephone
company before changing this
setting.
– Change the number of rings of the
voice mail service so that the
answering system can answer the
call first. To do so, contact your
service provider/telephone
company.
Caller’s recording time
You can change the maximum message
recording time allotted to each caller.
You can also select
“
Greeting only
”
which sets the unit to greet callers but
not record messages. The default
setting is
“
3min
”
.
1
{
MENU
}
(center of joystick)
i
{#}{
3
}{
0
}{
5
}
2
{V}
/
{^}
: Select the desired setting.
i
{
SAVE
}
i
{
OFF
}
Note:
L
If you want to select
“
Greeting
only
”
, follow the steps above and
press
{
0
}
in step 2.
L
When you select
“
Greeting only
”
:
– If you do not record your own
message, the unit will play the pre-
recorded greeting-only message
asking callers to call again later.
– If you use your own message,
record the greeting-only message
asking callers to call again later
(page 31).
Message alert
You can select whether or not the
message indicator on the handset
flashes slowly when new messages are
recorded. The default setting is
“
On
”
.
Important:
L
If you stored the voice mail access
number (page 36), the message
indicator also flashes for newly
recorded voice mail messages (page
37).
1
{
MENU
}
(center of joystick)
i
{#}{
3
}{
4
}{
0
}
2
{V}
/
{^}
: Select the desired setting.
i
{
SAVE
}
i
{
OFF
}
Note:
L
While message alert is on, battery
operating time is shortened (page 9).
TG743x(e).book Page 35 Monday, December 8, 2008 1:36 PM
