1. Introduction and Preparation
12
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
2.
Connect the unit with the USB cable (
1
), then click
[
Next
]
.
* The pictured model is KX-MB781.
3.
Click
[
Install
]
, then follow the on-screen
instructions.
L
The files will be copied to your computer.
For LAN connection (KX-MB781 only):
1.
[
Connect via the Network.
]
i
[
Next
]
L
The
[
Select a Network Device
]
dialog box will
appear.
2.
Check
[
Select in the searched list
]
and select the
unit from the list.
3.
[
Next
]
4.
Click
[
Install
]
, then follow the on-screen
instructions.
L
The files will be copied to your computer.
To view or install the operating instructions in the
CD-ROM
1.
Start Windows and insert the included CD-ROM into
your CD-ROM drive.
2.
Click
[
Operating Instructions
]
, then follow the on-
screen instructions to view or install the operating
instructions in PDF format.
L
Adobe Reader is required to view them.
Important notice
If you use Windows XP or Windows Vista, a message
may appear after connecting the unit with the USB
cable. This is normal and the software will not cause
any difficulties with your operating system. You can
continue the installation with no problem. The
message displayed is as follows:
L
For Windows XP users
“The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP.”
L
For Windows Vista users
“Would you like to install this device software?”
1
MB271-781-PFQW2640ZA-QRG-en.book Page 12 Tuesday, May 22, 2007 12:31 PM
