3.
Use
[
][
]
to select
"Target"
and press
[ENTER]
.
•
The multicast target screen is displayed.
4.
Use
[
][
]
to select a multicast target and press
[ENTER]
.
•
The " " mark in the selection column will be added or removed. The multicast will start for the multicast
targets displaying a " " mark.
Note
•
If no multicast targets with a " " mark displayed are registered in the selection column, the multicast
will not begin when
[START]
is pressed.
5.
Press
[START]
.
•
The multicast preparation screen is displayed, and when connection confirmations for lower-level
terminals are completed, the multicast will start.
Note
•
If
[END]
is pressed during multicast preparation, the multicast will be cancelled.
•
If no response is received from a lower-level terminal for a connection confirmation for
approximately 1 minute, the multicast tree will adjust and then the multicast will start.
6.
To end the multicast, press
[END]
.
Document Version 2015-08
User Manual
153
Using Multicast
