Note
•
To continue setting another routing, repeat
steps
•
The input
"Destination"
is converted to a
network address and then used. There is no
need to register multiple destination IP
addresses that have the same network
address.
13.
Press
[BACK]
.
•
The system settings screen is displayed.
Making Connection Settings
Note
•
You can use the administrator menu to hide the
connection settings screen (Page 130).
1.
Select
"Call set up"
and press
[ENTER]
.
•
The connection settings screen is displayed.
2.
Use
[
][
]
to select the following items for input:
•
The following items are displayed over 3 pages.
To view all the items, press
[R]
to move to the
next page, and press
[B]
to move to the
previous page.
Note
•
You must save the settings separately
for each screen on which you changed
the settings.
•
When
"SIP"
is set to
"OFF"
on the call
type settings screen (Page 123),
"Encryption (SIP)"
cannot be set.
•
When
"H.323"
is set to
"OFF"
on the
call type settings screen (Page 123),
"Encryption (H.323)"
cannot be set.
"Answer Mode"
: Use
[
][
]
to select how to
answer video conference calls (
"Manual"
[default],
"Auto"
, or
"Forced Answer"
"More than one incoming call"
: Use
[
][
]
to
select whether to accept calls from Sub Sites to
make video conferences of more than 2 parties.
–
"ON"
(default): Allow calls with more than 2
parties.
–
"OFF"
: Do not allow calls to have more than 2
parties.
Note
•
For sites operating as "Main Sites" in
multiple-party video conference calls using
the built-in MCU, select
"ON"
.
"Max. Bandwidth"
: Press
[ENTER]
and use
[
]
[
]
to select the maximum allowed bandwidth to
be used (
256 kbps
–
18 Mbps
) (default:
9.0 Mbps
).
"Max. Bandwidth Per Site (LAN 1)"
: Press
[ENTER]
, and then use
[
][
]
to select the
maximum bandwidth per site (
"256 kbps"
-
"18 Mbps"
, or
"Not Specified"
) (default:
"Not
Specified"
).
"Max. Bandwidth Per Site (LAN 2)"
(KX-VC1600
only): Press
[ENTER]
, and then use
[
][
]
to
select the maximum bandwidth per site
(
"256 kbps"
-
"18 Mbps"
, or
"Not Specified"
)
(default:
"Not Specified"
).
Note
•
For the KX-VC1300,
"Max. Bandwidth Per
Site (LAN 1)"
is displayed as
"Max.
Bandwidth Per Site"
.
•
During a 2-party call, the bandwidth of the
site with the lowest-set maximum
bandwidth is applied, and in a multiple-party
call, bandwidth is applied according to each
site’s maximum bandwidth and the number
of connected sites. However, when the
value of
"Max. Bandwidth Per
Site"
(excluding
"Not Specified"
) is
smaller, the value of
"Max. Bandwidth Per
Site"
is applied as the maximum bandwidth.
•
You cannot select a value that is higher than
the maximum bandwidth set by the dealer.
For details, contact your dealer.
"Dual stream"
: Use
[
][
]
to select whether dual
stream communication is enabled.
–
"ON"
(default): Enables dual stream
communication.
–
"OFF"
Disables dual stream communication.
"Send Content Method"
: Press
[ENTER]
, and
then use
[
][
]
to select the contents sending
method when dual stream is enabled.
–
"Auto"
(default): Automatically selects either
dual stream or single stream.
–
"Single stream"
: Fixed to single stream.
"Encode rate"
: Press
[ENTER]
and use
[
][
]
to select the encoding rate ratio for the main stream
and sub stream.
–
"Main (30%) < Sub (70%)"
: Prioritise the sub
stream during calls.
–
"Main (50%) = Sub (50%)"
(default): Use the
same priorities during calls.
–
"Main (70%) > Sub (30%)"
: Prioritise the main
stream during calls.
Document Version 2015-08
User Manual
105
Contacts and Settings
