Message
Cause and Solution
Check display resolution.
•
The computer’s display resolution is incompatible with the unit.
→
Set your computer’s resolution to a setting compatible with the unit
(Page 78).
n
is already in use.
Note
•
The IP address is
represented by
n
.
•
On the network you are using, another device is already using the IP
address you have input for the unit.
→
Make sure that all devices on the network have unique IP addresses
assigned.
Cooling Fan Malfunction.
Please turn off the system
and call for service.
•
The CPU cooling fan within the device has stopped.
→
Quickly turn off the power. Contact your dealer.
Call Failed due to
unsupported product or other
error.
•
An unsupported feature was used.
→
Check the software version of all parties. Update the unit so that
the versions match.
For details about supported versions and features, contact your dealer.
•
Connection to an unsupported MCU or non-Panasonic video
conference system was attempted.
→
For details about supported MCUs and non-Panasonic video
conference systems, contact your dealer.
Call disconnected due to
incompatible device or
unexpected error.
•
The other party’s device uses an unsupported codec.
→
Have the other party check their settings.
Received remote control ID
(
n1
). The unit current setting
is (
n2
).
Press [Home] button using
the correct remote control, or
setup remote control as
follows.
1. Press [.] and [#] at the same
time.
2. Within 2 seconds, press
[
n2
].
3. Press [Home] to finish, this
message will disappear.
If this message will not
disappear, please check the
batteries in your remote
control and try again.
Note
•
The remote control ID
of the remote control
(
1
/
2
/
3
) is represented
by
n1
.
•
The remote control ID
of the unit (
1
/
2
/
3
) is
represented by
n2
.
•
The remote control IDs of the unit and remote control do not match.
→
Follow the on-screen instructions to change the remote control ID of the
remote control to match that of the unit.
→
If you cannot change the remote control ID of the remote control,
contact your dealer.
→
If multiple remote controls with assigned IDs will be used close together
or if you do not want this message to be displayed, select
"OFF"
for
"Check ID mismatch"
186
User Manual
Document Version 2015-12
Additional Information
Содержание KX-VC1300
Страница 199: ...Document Version 2015 12 User Manual 199 Notes ...