
Note
•
Please carefully read and confirm the
cautions in the dialogue box before
proceeding to the next step.
6.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The update is automatically downloaded and
installed.
•
To complete the update, the system will
automatically restart. Before restart, a message
will be displayed as detailed below.
The message displayed before the restart
After the restart, the system will start up with the
latest software.
Note
•
Contact your dealer for more information on
obtaining the latest firmware and User Manual.
•
If the checking, downloading, or installing of a
software update fails, an error message is
displayed. Press
[ENTER]
to restart the
system.
Please try the following:
a.
Check the settings for
"DNS Server"
or
"Primary DNS Server"
in network settings
(Page 106). Then, try updating the software
again.
When
"DNS Server"
is set to
"Auto"
, the
DHCP server may be the cause of the
problem. In this case, contact your network
administrator.
b.
If the above step is unsuccessful, try
updating the software again later. The
network may be currently very busy.
If the retry fails several times, there might be a
problem with your communication lines. Please
contact your dealer.
•
Software cannot be updated when using IPv6
addresses.
Initialising a Video Camera
Note
•
Initialisation is available only for video cameras
connected to your unit and only when you are
not on a video conference call.
•
For details about compatible video camera
models, contact your dealer.
1.
Select
"Camera Initialize"
and press
[ENTER]
.
•
The video camera initialisation screen is
displayed.
2.
Use
[
][
]
to select the video camera to be
initialised (
"Main"
[default] or
"Sub"
).
3.
Press
[R]
.
•
A dialogue box confirming whether you want to
start the video camera initialisation is displayed.
4.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
After the initialisation is complete, the
administrator menu screen is displayed.
Performing System
Initialisation
1.
Select
"System Initialize"
and press
[ENTER]
.
•
A dialogue box confirming whether you want to
start the system initialisation is displayed.
2.
Use
[
][
]
to select
"Yes"
and press
[ENTER]
.
•
The system will automatically restart to
complete the system initialisation.
Note
•
After initialisation, all system settings
previously made and information stored in
the contact list, profile, local site, and call
history are cleared.
•
The updated startup screen data has been
damaged due to a data import operation
(Page 137).
•
Features activated due to software
enhancement (Page 138) are not cleared.
140
User Manual
Document Version 2015-12
Contacts and Settings
Содержание KX-VC1300
Страница 199: ...Document Version 2015 12 User Manual 199 Notes ...