Panasonic KX-UT123, Руководство администратора

Страница: 46 / 312

The following table shows the priority with which settings from each method are applied (lower numbers indicate
higher priority):
Setting Order Priority Setting Method
1 4 The factory default settings for the unit
2 3 Pre-provisioning with the configuration file
3
2–3 Provisioning with the master configuration file
2–2 Provisioning with the product configuration file
2–1 Provisioning with the standard configuration file
4 1
Settings configured from the Web user interface or the phone user
interface
According to the table, settings configured later override previous settings (i.e., settings listed lower in the table
have a higher priority).
If different values are specified for the same setting by the master configuration file and Web user interface
programming, the value specified from the Web user interface is applied. This is because values specified from
the Web user interface have a higher priority.
For settings configured from the Web user interface and the phone user interface, the value specified most
recently receives priority.
Notice
•
Make sure to perform Reset to Factory Default before connecting the unit to a different phone system.
For details, see
1.2.1.1 Resetting to Factory Default (Factory Setting) .
2.4 Configuration File Specifications
The specifications of the configuration files are as follows:
File Format
The configuration file is in plain text format.
File Size
The maximum size of a configuration file is 120 KB. Regardless of the number of configuration files, the total
size of the configuration files must be 120 KB or less.
Lines in Configuration Files
A configuration file consists of a sequence of lines, with the following conditions:
•
Each line must end with "<CR><LF>".
•
The maximum length of a line is 537 bytes including "<CR><LF>".
•
The following lines are ignored:
–
Lines that exceed the limit of 537 bytes
–
Empty lines
–
Comment lines that start with "
#
"
•
Configuration files must start with a comment line containing the following designated character sequence
(44 bytes):
# Panasonic SIP Phone Standard Format File #
The hexadecimal notation of this sequence is:
46 Administrator Guide Document Version 2013-03
2.4 Configuration File Specifications