Dialing by Using Call Logs
The last 30 incoming calls and outgoing calls are stored
in their respective logs, in order of newest to oldest call.
You can make calls to the numbers listed in the call logs.
1.
Press
Call Log
.
2.
Press
[ ]
or
[ ]
to select the call log type, and then
press
[ENTER]
.
3.
Press
[ ]
or
[ ]
to select the desired entry.
4.
Go off-hook.
5.
To end the call, go on-hook.
Note
•
For KX-UT133/KX-UT136, you can also press
an idle DN button (flexible button) in step
4
to
connect the call. For details about flexible
buttons, see "Flexible Buttons (KX-UT133/
KX-UT136 only) (Page 34)".
•
For KX-UT113/KX-UT123, you can press
Call
instead of going off-hook. If more than
one line is available at your unit, select the line
to use, and then press
[ENTER]
.
•
You can add a call log entry to the phonebook.
See "Adding a Phonebook Entry from the
Incoming Call Log (Page 35)".
Editing a phone number before
dialing from the incoming call log
You can edit a phone number in the incoming call log
before using it to dial.
1.
Press
Call Log
.
2.
Press
[ ]
or
[ ]
to select "
Incoming Call Log
",
and then press
[ENTER]
.
3.
Press
[ ]
or
[ ]
to select the desired entry.
4.
Do one of the following, depending on your unit:
For KX-UT113/KX-UT123 users
•
Press
Menu
, select "
Edit
", and then press
[ENTER]
.
For KX-UT133/KX-UT136 users
•
Press
Edit
.
5.
Edit the number, and then go off-hook or press
Call
.
6.
To end the call, go on-hook.
Redialing the Last Number You
Dialed (Redial, Last Number)
You can redial the last phone number that you dialed.
1.
Press
[REDIAL]
.
2.
To end the call, go on-hook.
Note
•
For KX-UT133/KX-UT136, to select a line to use
to redial, press the appropriate DN button
(flexible button) before you press
[REDIAL]
.
For details about DN buttons, see "Flexible
Buttons (KX-UT133/KX-UT136 only)
(Page 34)".
•
The unit may be configured to display the
outgoing call log instead of immediately
redialing. You can select an entry from the call
log to make a call (Page 26). For details, consult
your administrator or dealer.
One-touch Dialing (KX-UT133/
KX-UT136 only)
You can make a call with a One-touch operation if a
One-touch Dialing button has been created for the
desired party. One-touch Dialing buttons can also be
configured to access features of your phone system, if
available.
1.
Go off-hook, and then press the One-touch Dialing
button (flexible button).
2.
To end the call, go on-hook.
Note
•
A BLF (Busy Lamp Field) button (flexible button)
can also be used to call an extension simply by
pressing the button. For details, consult your
administrator or dealer.
•
For details about flexible buttons such as
One-touch Dialing buttons and BLF buttons,
see "Flexible Buttons (KX-UT133/KX-UT136
only) (Page 34)".
26
Operating Instructions
Document Version 2011-09
Feature Operations
