29
© Panasonic Corporation 2017
29
5. The CS registered in step 2 is shown at the bottom of the Survey List.
Enter the CS index number of the CS that you want to specify as a Primary CS (and
Secondary CS) in Primary CS Index (and Secondary CS Index) for the registered CS.
6. Click [Apply] and Click [OK].
・
After clicking [OK], all CSs will restart.
・
You cannot add a CS at the end of level 8.
・
After clicking OK, all CSs will restart automatically.
1. Log in to the Super Master CS.
・
When IP address of the Super Master CS is
unknown, see “Appendix B”.
2. Register a CS to the Air Sync Group for
which you want to extend the CS coverage area.
・
Please see “Section 3.3”.
3. In the [System] tab, select [Tree Survey].
[System] → [Tree Survey]
4. Select an Air Sync Group.
4.1.2 Manually adding a CS at the end of the Connection Tree
ID and Password for
administrator
ID : admin
Password : adminpass
6.
3.
3.
4.
5.
Notice
When you want to add CSs to the middle of the connection diagram, please conduct the Tree Survey again.
