21
© Panasonic Corporation 2017
21
After finishing previous page, conduct following step.
6.
Select an Air Sync Group (2~8).
7. Select the number of CS (1~32) which you want
to register in the air sync group.
8. Click [Start CS Registration] and click [OK].
9. When all CSs are registered, this sequence
completes automatically.
10. Repeat 5 to 7 for each Air Sync Group.
In the case of multiple Air Sync Group
3.1 CS Registration <Step2> : CS Registration
After CS registration
Master
Slave
Master
Slave
LED
Master : Green
Slave : Green
far Slave : Red slow flash
Slave
LED
Master : Green
Slave : Red slow flash
far Slave : Red slow flash
Slave
6.
7.
Cancel
8.
9.
Notice
When IP address of the Super Master CS is unknown, see “Appendix B”.
Please see “Appendix C” about the detail of LED.
(If all CSs displayed in “CS Registered List”, CS Registration is completed even if CS’s LED is different.)
You cannot register the following CSs:
• CSs that are not connected to the network
• CSs that cannot receive radio signals from the Air Sync Master CS
• Please refer to “41-003” for causes other than the above.
8.