Getting Started
9
Setting up
Inserting/removing the SIM
card
The SIM (Subscriber Identity Module)
card must be inserted before using the
unit.
Important:
L
Before handling the SIM card:
– ensure that the base unit is turned
off.
– disconnect the plug before opening
the SIM card cover.
Inserting the SIM card
1
Press the notch on the SIM card
cover firmly, and slide it in the
direction of the arrow.
2
Position the SIM card as shown with
IC-side (gold contacts) facing down
and notched corner facing right.
Carefully slide the SIM card into the
SIM card pocket.
Important:
L
Ensure that the SIM card is fully
inserted so that the SIM card
cover can be properly closed.
3
Close the SIM card cover after you
finish.
Removing the SIM card
To remove the SIM card, place a finger
on the bottom edge of the SIM card and
gently slide it out.
TW501NZ(e).book Page 9 Wednesday, September 16, 2009 3:00 PM