Settings and Security
25
7
Select the desired setting.
i
{
>
}
L
If you select
“
Off
”
, press
{j
/OK
}
again.
8
Enter/edit the phone number if
necessary (21 digits max.).
i
{j
/OK
}
L
When you select
“
If
Unavailable
”
or
“
No Answer
”
in step 6, select a delay time (5-
30 seconds; divisible by 5
seconds).
i
{j
/OK
}
9
{ih}
Checking the status
1
{j
/OK
}
2
{V}
/
{^}
:
“
Settings
”
i
{
>
}
3
{V}
/
{^}
:
“
Call Settings
”
i
{
>
}
4
{V}
/
{^}
:
“
Call Divert
”
i
{
>
}
5
{V}
/
{^}
:
“
Status
”
i
{
>
}
6
{V}
/
{^}
: Select the desired option.
i
{
>
}
7
{ih}
Special instructions
for security
PIN code
PIN code is used for security to limit
access to the unit and to protect your
SIM card against unauthorised use. PIN
number is issued by your service
provider.
Important:
L
If you enter the incorrect PIN code 3
times, the SIM card is locked. Enter
the 8-digit PUK code to unlock. PUK
number is issued by your service
provider.
L
If you enter the incorrect PUK code 10
times, the SIM card is permanently
locked. The SIM card will need to be
replaced as all information stored will
be lost. Contact your service provider
for further information.
Setting the PIN code request
Your PIN code is requested when you:
– turn the base unit on after initially
inserting a PIN locked SIM card.
– turn the base unit on after turning this
feature on.
Once you enter PIN code, you don’t
need to re-enter it each time the base
unit is turned on.
The default setting is followed by the
SIM card setting.
Important:
L
The PIN code request cannot be set to
“
Off
”
with some SIM card types.
1
{j
/OK
}
2
{V}
/
{^}
:
“
Security
”
i
{
>
}
3
{V}
/
{^}
:
“
PIN Code
”
i
{
>
}
4
{V}
/
{^}
:
“
PIN Code Request
”
i
{
>
}
5
{V}
/
{^}
: Select the desired setting.
i
{
>
}
6
Enter the current PIN code (4 to 8
digits).
i
{
>
}
L
A confirmation tone will sound.
7
{ih}
Changing PIN code
When you change PIN code, make sure
that the PIN code request is set to
“
On
”
(page 25).
Important:
L
If you change PIN code, please make
note of your new PIN code. The unit
“
If Unreachable
”
Calls are diverted when the unit is out
of GSM network range.
TW501NZ(e).book Page 25 Wednesday, September 16, 2009 3:00 PM
