Panasonic KX-TVS90, Руководство по установке

Страница: 108 / 410

INTEGRATING THE VPS WITH THE PANASONIC KX-TA SERIES PBX AND KX-TD SERIES PBX
108 Installation Manual
4.5.11 Voice Mail Transfer Button Assignment via Station
Programming
This feature allows an extension user to transfer calls directly to a Voice Mailbox. This is
available with both Digital and Inband Integrations.
PC programming is also available for KX-TD500 users (see 4.5.12
Button Assignment via
PC Programming).
1.
Enter PITS Programming:
For KX-TA624
With the phone on-hook, Set the MEMORY switch to "PROGRAM" .
(Display changes to PITS-PGM Mode.)
For KX-T series PBX that uses DPT Integration
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99] . (Display changes to PITS-PGM Mode.)
2.
Press the desired Flexible ( CO or DSS/BLF ) button that you want to assign as the VTR
button.
3.
Dial [94] (for KX-TA624) or [8] (for KX-T series PBX that uses DPT Integration).
Screen output: VTR
4.
Dial the Voice Mail extension number .
Screen output: VTR-_ _ _
(_ _ _ = The extension number you entered).
5.
Press STORE.
6.
For KX-TA624
Set the MEMORY switch to "SET" .
For KX-T series PBX that uses DPT Integration
Press the PROGRAM button or lift the handset.
7.
Repeat these steps for each telephone.
4.5.12 Button Assignment via PC Programming
The KX-TD500 users can assign buttons via PC programming. Follow the procedure below to
assign each button.
1.
Go to "4-2 Extension Line" screen (refer to the screen image in 4.5.6 Live Call
Screening Assignment via PC Programming).
2.
Select the "Card No." and "Port No." which you are going to program.
Conditions: This button must be a CO or DSS/BLF key to be
programmed as a VTR button. When all Voice Mail
ports are busy and this key is pressed, the user will hear
reorder tone.