background image

– 10 –

Safety Instructions

Take special care to follow the safety suggestions listed below.

Installations
Environment
1) Do not use this unit near water—for example, near a bathtub, washbowl,

sink, etc. Damp basements should also be avoided.

2) The unit should be kept away from heat sources such as radiators, kitchen

range, etc. It also should not be placed in rooms where the temperature is
less than 5

o

C or greater than 40

o

C.

Placement
1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and liquids are not

spilled into, the unit. Do not subject this unit to excessive smoke, dust,
mechanical vibration or shock.

3) Place the unit on a flat surface.

Lightning surge
This unit has already been equipped with a built-in lightning protection circuit.
However, we recommend that you install lightning protection on the telephone
line, if your area has a high incidence of lightning strikes.

To install the above option, please contact your local sales shop.

Lightning damage is not covered in the warranty even if lightning protection is
installed.

WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

If there is any trouble, disconnect the unit from the telephone line and connect a
known working phone. If the known working phone operates properly, do not
reconnect the unit to the telephone line until the trouble has been repaired. If
the known working phone does not operate properly, consult your telephone
company.

Содержание KX-TS2300HGW












Отзывы: