Panasonic KX User Guide for MaxCS
Page 3
6.
*/Silent Mode Key
While on a call this would transmit the * dtmf. When the handset is idle you can hold this key
down for two seconds to turn off the ringer. To turn the ringer back on hold this key again for
two seconds.
7.
Line Key
This key will display the line/ extension number assigned to your handset.
8.
Receiver
All non-speaker phone audio will come from this source.
9.
Display
This is where you will see the battery status, signal strength, and Incoming caller ID. There may
be more data displayed here depending on your call state.
10.
Soft Keys
These keys perform different functions depending on call state of the phone. From left to right
these keys are referred in this manual as key A B or C.
11.
Power/Cancel Key
12.
XFER/CLR Key
This is used while on a call to xfer a call. When phone is idle it is used to clear input.
13.
Function Key
This key is not supported with MaxCS.
14.
Microphone
This is what is used to capture outbound audio.
15.
Charge Contacts
These are what delivers power to the handset when it is on the charging cradle.