Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp
49
Troubleshooting
General use
Programmable settings
Making/answering calls, intercom
Problem
Cause & solution
The unit does not work.
L
Make sure that the battery is installed correctly and fully
charged (page 9).
L
Check the connections (page 9).
L
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L
The handset has not been registered to the base unit.
Register the handset (page 15).
“
Recharge battery
” is
displayed and I cannot
perform the following
operations:
– recording or erasing a
customized ringer
– editing a title for a
customized ringer
– copying MULTI TALK V
USB Utility settings
(songs, phonebook
items, programmable
settings, etc.) from your
computer
L
The battery power is low. Fully charge the battery (page
9) and try again.
Problem
Cause & solution
I cannot program items.
L
While another user is listening to messages or the
answering system is answering a call, you cannot
program. Try again later.
While programming, the
handset starts to ring.
L
A call is being received. Answer the call and start again
after hanging up.
Problem
Cause & solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
L
Move the handset and the base unit away from other
electrical appliances. (microwave, wireless LAN
appliance, etc.)
L
Move closer to the base unit.
L
Raise the base unit antennas.
L
Turn on the clarity booster feature (page 19).
THA11.book Page 49 Tuesday, March 7, 2006 5:56 PM