Panasonic KX-TH112 - Cordless Phone - Operation Скачать руководство пользователя | Manualshive

Страница: 6 / 92

background image

Introduction

6

For assistance, please visit http://www.panasonic.com/phonehelp

Important safety
instructions

When using the product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, or
personal injury.
1. Read and understand all instructions.
2. Follow all warnings and instructions

marked on the product.

3. Unplug the product from power outlets

before cleaning. Do not use liquid or
aerosol cleaners. Use a moist cloth for
cleaning.

4. Do not use the product near water, for

example near a bathtub, wash bowl,
kitchen sink, etc.

5. Place the product securely on a stable

surface. Serious damage and/or injury
may result if the product falls.

6. Do not cover slots and openings on the

product. They are provided for
ventilation and protection against
overheating. Never place the product
near radiators, or in a place where
proper ventilation is not provided.

7. Use only the power source marked on

the product. If you are not sure of the
type of power supplied to your home,
consult your dealer or local power
company.

8. Do not place objects on the power

cord. Install the product where no one
can step or trip on the cord.

9. Do not overload power outlets and

extension cords. This can result in the
risk of fire or electric shock.

10. Never push any objects through slots

in the product. This may result in the
risk of fire or electric shock. Never spill
any liquid on the product.

11. To reduce the risk of electric shock, do

not disassemble the product. Take the
product to an authorized service center
when service is required. Opening or
removing covers may expose you to
dangerous voltages or other risks.

Incorrect reassembly can cause
electric shock when the product is
subsequently used.

12. Unplug the product from power outlets

and refer servicing to an authorized
service center when the following
conditions occur:
A. When the power cord is damaged

or frayed.

B. If liquid has been spilled into the

product.

C. If the product has been exposed to

rain or water.

D. If the product does not work

normally by following the operating
instructions. Adjust only controls
covered by the operating
instructions. Improper adjustment
may require extensive work by an
authorized service center.

E. If the product has been dropped or

physically damaged.

F. If the product exhibits a distinct

change in performance.

13. During thunderstorms, avoid using

telephones except cordless types.
There may be a remote risk of an
electric shock from lightning.

14. Do not use the product to report a gas

leak, when in the vicinity of the leak.

SAVE THESE
INSTRUCTIONS

CAUTION:

Installation

L

Never install telephone wiring during a
lightning storm.

L

Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.

L

Never touch uninsulated telephone
wires or terminals unless the telephone
line has been disconnected at the
network interface.

L

Use caution when installing or modifying
telephone lines.

TH112(e).book Page 6 Thursday, June 8, 2006 11:07 AM

«
...
4
5
6
7
8
...
»

Содержание KX-TH112 - Cordless Phone - Operation





























































































Отзывы:

Нет отзывов

Похожие инструкции для KX-TH112 - Cordless Phone - Operation

Бренд: Janome Страницы: 32

Бренд: Jack Страницы: 20

Бренд: Panasonic Страницы: 2

KX-TG2248S - 2.4 GHz Digital Cordless Phone Answering...

Бренд: Panasonic Страницы: 35

Бренд: Singer Страницы: 41

Scholastic 85SCH

Бренд: Singer Страницы: 230

Бренд: Kärcher Страницы: 501

Бренд: Necta Страницы: 23

Бренд: Radio Shack Страницы: 20

Streamfeeder Tagger 125 Series

Бренд: Thiele Страницы: 37

AMS-210EN-HL1306

Бренд: JUKI Страницы: 12

Бренд: Baby Lock Страницы: 28

HZL - 353Z Series

Бренд: JUKI Страницы: 35

Бренд: Janome Страницы: 25

HQ POWER HQSM10010

Бренд: Velleman Страницы: 33

GraceHoop 2 2005

Бренд: Grace Страницы: 14

Бренд: Grace Страницы: 99

Бренд: Singer Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды