Panasonic KX-TGF970 Series Скачать руководство пользователя

Страница: 88 / 116

Problem

Cause/solution

I cannot hear a dial tone.

The base unit’s AC adaptor or telephone line cord is not

connected. Check the connections.

Disconnect the base unit from the telephone line and

connect the line to a known working telephone. If the

working telephone operates properly, contact our service

personnel to have the unit repaired. If the working

telephone does not operate properly, contact your phone

service provider.

I cannot pair a cellular phone to

the base unit.

Depending on the compatibility of the cellular phone, you

may not be able to pair it to the base unit. Confirm that

your cellular phone supports the hands-free profile (HFP)

specification.

Confirm that the Bluetooth feature of your cellular phone

is turned on. You may need to turn this feature on

depending on your cellular phone.

The Bluetooth technology on your cellular phone may not

be functioning normally. Turn off and on your cellular

phone.

If your cellular phone is already connected to another

Bluetooth device such as a Bluetooth headset, turn it off

or disconnect it from your cellular phone.

Some cellular phones may require you to enter the

Bluetooth PIN to pairing. Confirm that you entered the

correct PIN.

I cannot connect a cellular

phone to the base unit.

Confirm that your cellular phone is turned on.

Confirm that your cellular phone is within base unit range

(page 16).

Your cellular phone’s Bluetooth feature is turned off. Turn

it on.

Depending on the state of the wireless environment, such

as the presence of any electrical interference, there may

be a delay even if the auto connection feature is turned

on. You can connect to the base unit manually (page 22).

The cellular phone has not been paired to the base unit.

Pair the cellular phone (page 20).

If your cellular phone is already connected to another

Bluetooth device such as a Bluetooth headset or other

Panasonic DECT phone, disconnect the device, then

perform the connecting procedure to the base unit.

If your cellular phone is already registered on another

Panasonic DECT phone, this function will not work

properly. We strongly recommend that you remove the

registration of this phone on both your cellular phone and

on the other Panasonic DECT phone.

The base unit beeps.

New messages have been recorded. Listen to the new

messages (page 77).

Error sound is heard when I

press some keys on base unit.

Automated call block is being screened. Try again later.

For assistance, please visit http://shop.panasonic.com/support

Useful Information

Содержание KX-TGF970 Series





















































































































Результаты поиска

Содержание KX-TGF970 Series

Отзывы:

Похожие инструкции для KX-TGF970 Series

Бренды по названию

Популярные бренды

Panasonic KX-TGF970 Series, Руководство по эксплуатации

Результаты поиска

Содержание KX-TGF970 Series

Отзывы:

Похожие инструкции для KX-TGF970 Series

Бренды по названию

Популярные бренды