Panasonic KX-TGF970 Series Скачать руководство пользователя

Страница: 91 / 116

Problem

Cause/solution

I cannot answer an incoming

call using voice commands.

The answer by voice command feature is turned off. To

turn it on, see page 35.

Baby monitor is set to

“

”

. Turn off the baby monitor

feature (page 64).

The unit answers an incoming

call on its own.

This situation might happen due to a false detection of

ambient noise (dog barking, TV sound, etc.). Move the

unit further away from the noise sources.

If you are using other telephone that has Talking Caller ID

feature turned on, it may also trigger false detection. Turn

the Talking Caller ID feature off on the other telephone.

To minimize false detection, decrease the sensitivity level

of the answer by voice command (page 35, 58, 61).

I cannot make long distance

calls.

Make sure that you have long distance service.

I cannot use voice paging.

You cannot use voice paging if other units are in use.

Call block

Problem

Cause/solution

The dedicated key for

Telemarketing call block is not

displayed.

While on the charger, the

TELE.BLK.

key is not

available. Lift the handset from the charger.

If the Auto talk feature is set to on, the call is answered

automatically when the handset is lifted from the charger

during an incoming call. Turn off the auto talk feature

(page 58).

Caller ID/Talking Caller ID

Problem

Cause/solution

Caller information is not

displayed.

You must subscribe to Caller ID service. Contact your

phone service provider for details.

If your unit is connected to any additional telephone

equipment such as a Caller ID box or cordless telephone

line jack, plug the unit directly into the wall jack.

If you use a DSL/ADSL service, we recommend

connecting a DSL/ADSL filter between the base unit and

the telephone line jack. Contact your DSL/ADSL provider

for details.

The name display service for landline calls may not be

available in some areas. Contact your phone service

provider for details.

Other telephone equipment may be interfering with this

unit. Disconnect the other equipment and try again.

Caller information is displayed

or announced late.

Depending on your phone service provider, the unit may

display or announce the caller’s information at the 2nd

ring or later.

Move closer to the base unit.

For assistance, please visit http://shop.panasonic.com/support

Useful Information

Содержание KX-TGF970 Series





















































































































Результаты поиска

Содержание KX-TGF970 Series

Отзывы:

Похожие инструкции для KX-TGF970 Series

Бренды по названию

Популярные бренды

Panasonic KX-TGF970 Series, Руководство по эксплуатации

Результаты поиска

Содержание KX-TGF970 Series

Отзывы:

Похожие инструкции для KX-TGF970 Series

Бренды по названию

Популярные бренды