Panasonic KX-TGF740, Руководство по эксплуатации

Страница: 51 / 76

Key Operation
MDN or MCN Adjust the receiver/speaker
volume (during playback)
1 or MFN Repeat message (during
playback)
*1
2 or MEN Skip message (during
playback)
3 Enter the “ Settings ” menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
M PAUSE N Pause message *2
9 or
M STOP N
Stop recording
Stop playback
0 Turn answering system off
*4
*3 Erase currently playing
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN : “
Playback
” a M SELECT N
*3 You can also erase as follows:
M PAUSE N a MbN : “ Erase ” a
M SELECT N a MbN : “
Yes
” a M SELECT N
Calling back (Caller ID subscribers
only)
1
Press M PAUSE N during playback.
2
MbN : “ Call back ” a M SELECT N
Editing the number before calling back
1
Press M PAUSE N during playback.
2
MbN : “
Edit & Call
” a M SELECT N
3
Press M EDIT N repeatedly until the phone
number is shown in the desired format
(page 48).
a M N
Erasing all messages
1
M MENU N#325
2
MbN : “
Yes
” a M SELECT N a M OFF N
Advanced new message
alerting features
Audible message alert
This feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the
“ Base unit beep ”
setting is turned on. The default setting is
“
Off
” .
Handset
1
M MENU N#339
2
MbN : Select the desired setting. a
M SAVE N a M OFF N
New message alert by a call
This feature allows you to receive a
notification by phone when new messages are
recorded. The base unit calls a phone number
you specify. You can then operate the
answering system remotely to listen to the
new message.
To use this feature, you must:
– store a phone number to which the unit
makes the call to.
– turn on the new message alert setting.
After you answer the new message alert call,
you can listen to messages from that call
(page 52).
Important:
R A new message alert is stopped 1 minute
after the unit starts to call. The unit will not
retry the call even if the call is not answered.
For assistance, please visit http://shop.panasonic.com/support 51
Answering System
TGF74xUSA_OI_0416_ver211.pdf 51 2020/04/16 8:51:27