Panasonic KX-TGF740 Скачать руководство пользователя

Страница: 21 / 76

Do not lift the power supplying handset
from the base unit during power backup
mode.

Ni-MH battery performance (supplied
batteries) during power backup mode

When the batteries are fully charged,
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power

backup mode: 1.5 hours max.

– Continuous use of the handset other than a

handset in power backup mode: 2 hours
max.

– Not in use in power backup mode: 2 hours

max.

Making calls during a power
failure

When only 1 handset is registered:

Lift the handset and dial the phone
number.

Within 1 minute, place the handset on
the base unit.

Wait until speakerphone is turned
on automatically and the call is
made.

When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.

When you finish talking, press

OFF

When 2 or more handsets are registered:

You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.

Note:

The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.

Making a call using the redial list

When only 1 handset is registered:

Lift the handset.

MEN

REDIAL

MbN

: Select the desired entry.

Within 1 minute, place the handset on
the base unit.

Wait until speakerphone is turned
on automatically and the call is
made.

When 2 or more handsets are registered:

You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.

Making a call using the phonebook

There must be at least 2 handsets
registered to the base unit in order for the
phonebook feature to be used during a
power failure.

You should leave one handset on the base
unit for supplying the power, and use another
handset for making calls.

Answering calls during a power
failure

When only 1 handset is registered:

When the unit rings, keep the handset
on the base unit and press

MZN

Speakerphone is turned on.

When you finish talking, press

OFF

When 2 or more handsets are registered:

When the unit rings, use a handset which is
not supplying power to the base unit.

Do not use or lift the handset which is
placed on the base unit during power
backup mode.

Note:

The range of the base unit is limited during
a power failure. Please use the handset
close to the base unit.

For assistance, please visit http://shop.panasonic.com/support

Making/Answering Calls

TGF74xUSA_OI_0416_ver211.pdf 21

2020/04/16 8:51:25

Содержание KX-TGF740













































































Результаты поиска

Содержание KX-TGF740

Отзывы:

Похожие инструкции для KX-TGF740

Бренды по названию

Популярные бренды

Panasonic KX-TGF740, Руководство по эксплуатации

Результаты поиска

Содержание KX-TGF740

Отзывы:

Похожие инструкции для KX-TGF740

Бренды по названию

Популярные бренды