Using Bluetooth devices
Problem
Cause/solution
I cannot copy phonebook
entries from a cellular phone.
R
Confirm that the cellular phone supports Bluetooth
wireless technology.
R
Confirm that the cellular phone supports the Phone Book
Access Profile (PBAP) or Object Push Profile (OPP)
specification.
R
If the cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset, turn it off
or disconnect it from the cellular phone.
R
Someone is using a cellular line or headset. Try again
later.
R
Turn the cellular phone off, then turn it on and try again.
R
If an entry is already stored in the unit’s phonebook, the
entry cannot be copied even by selecting another group.
R
iPhone does not support individual phonebook copy.
I cannot have a conversation
using the headset.
or
I cannot connect my headset to
the base unit.
R
Confirm that the Bluetooth wireless headset supports the
HeadSet Profile (HSP) specification.
R
Your Bluetooth headset is not paired. Pair it (page 60).
R
Turn your headset off, then turn it on and try again.
R
If your headset is already connected to another Bluetooth
device such as your cellular phone, disconnect the
headset from your cellular phone, then perform the
connecting procedure from the base unit.
R
Only 2 Bluetooth devices can be used with the unit at the
same time (for example, 2 cellular lines, or the headset
and 1 cellular line).
Noise is heard during a call on
the headset.
R
A Bluetooth headset can communicate with the base unit
within a range of approximately 10 m (33 feet). The
connection may be subject to interference from
obstructions such as walls or electronic devices. Move
closer to the base unit.
Some headset enhanced
features are not available.
R
The base unit does not support enhanced features such
as Last number redial or Call reject.
An error tone is heard when I
try to program the Bluetooth
feature.
R
The Bluetooth feature cannot be accessed immediately
after connecting the AC adaptor to the base unit. Wait a
few seconds and try again.
R
The headset has not connected to the base unit yet, even
though you performed the connecting procedure setting.
Wait a few seconds and try again.
78
For assistance, please visit www.panasonic.com/support
Useful Information
TGF37x(en)_1128_ver032.pdf 78
2014/11/28 16:08:44