area code and format of the edited number.
The next time someone calls from the same
area code, caller information is customized by
the unit as follows:
– When the call is being received, the Caller
ID number is displayed in the same format
as the edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as
the edited number, when reviewed from the
caller list.
For example, you can use this feature to set
the unit to ignore the area code of callers in
your area, so that you can call these local
numbers using caller information without
dialing the area code.
To activate this feature, you must edit an entry
in the caller list, then call that number. After
that, phone numbers from that caller’s area
code are edited automatically.
This feature can be set for each unit (page 45,
48). The default setting is
“
On
”
.
Note:
R
Phone numbers from the 4 most recently
edited area codes are automatically edited.
Erasing selected caller
information
Handset / Base unit
1
Proceed with the operation for your unit.
Handset:
MCN
CID
Base unit:
M
CID
N
2
MbN
: Select the desired entry.
3
M
ERASE
N
a
MbN
:
“
Yes
”
a
M
SELECT
N
4
Proceed with the operation for your unit.
Handset:
M
OFF
N
Base unit:
M
EXIT
N
Erasing all caller information
Handset / Base unit
1
Proceed with the operation for your unit.
Handset:
MCN
CID
Base unit:
M
CID
N
2
M
ERASE
N
a
MbN
:
“
Yes
”
a
M
SELECT
N
3
Handset:
M
OFF
N
56
For assistance, please visit www.panasonic.com/support
Caller ID Service
TGF37x(en)_1128_ver032.pdf 56
2014/11/28 16:08:42
