Setting up
Connections
n
Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit, then to the single-line telephone jack
(RJ11C) until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
R
Use only the supplied Panasonic AC
adaptor PNLV226.
1
3
4
4
5
2
n
Charger
Connect the AC adaptor to the power
outlet.
1
Battery installation
R
USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (
1
).
R
Do NOT use alkaline/manganese/Ni-Cd
batteries.
R
Confirm correct polarities (
,
).
1
R
Follow the directions on the display to set
up the unit.
10
For assistance, please visit http://shop.panasonic.com/support
Getting Started
TGE43xUS(en)_1112_ver021.pdf 10
2015/11/12 10:12:56