Panasonic KX-TGE262C, Руководство по эксплуатации

Страница: 44 / 80

4
Proceed with the operation according to
your selection in step 3.
n
Once:
Enter the desired month and date. a
M OK N
n Weekly:
MbN : Select the desired day of the week
and press M SELECT N . a M OK N
5
Set the desired time.
6
* : Select “
AM
” or “
PM
” . a M OK N
7
Enter a text memo (10 characters max.).
a M OK N
8
MbN : Select the desired alarm tone. a
M SELECT N
R We recommend selecting a different
ringer tone from the one used for
outside calls.
9
MbN : Select the desired snooze setting.
a M SAVE N
10
M SELECT N a M OFF N
Note:
R Press M STOP N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key, M N , or M SNOOZE N to
stop the sound but keep the snooze
function activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Night mode
Night mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Night mode can be set for each unit.
Using the phonebook’s group feature
(page 33), you can also select groups of
callers whose calls override night mode and
ring the handset (Call Display subscribers
only).
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
R We recommend turning the base unit ringer
off (page 38, 40) in addition to turning the
night mode on. (KX-TGE260 series: page 3)
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
For handset setting: M MENU N#238
For base unit setting (using a
handset)
*1 : M MENU N#*238
2
MbN : Select the desired setting. a
M SAVE N
R If you select “
Off
” , press M OFF N to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
* : Select “
AM
” or “
PM
” . a M OK N
5
Enter the desired hour and minute you
wish to end this feature.
6
* : Select “
AM
” or “
PM
” .
7
M SAVE N a M OFF N
*1 KX-TG465SK series: page 3
Changing the start and end time
1
For handset setting: M MENU N#237
For base unit setting (using a
handset)
*1
: M MENU N#*237
2
Continue from step 3, “Turning night
mode on/off”, 3.
*1 KX-TG465SK series: page 3
Selecting groups to bypass night
mode
1
For handset setting: M MENU N#241
For base unit setting (using a
handset)
*1
: M MENU N#*241
2
Select your desired groups by pressing
1 to 9 .
R “ ” is displayed next to the selected
group numbers.
R To cancel a selected group, press the
same dial key again. “
” disappears.
44
Programming
TGE26x_27xC(en)_1224_ver012.pdf 44 2013/12/24 15:43:31