Panasonic KX-TGD890, Руководство по эксплуатации

Страница: 26 / 84

Call block
You can press the M CALL BLOCK N button in
the following situations to disconnect the
current call and add a phone number to the
call block list:
– when an incoming call is being received
– when an incoming call is being recorded by
the answering system
– when talking on an outside call
Once a phone number has been added to the
call block list, the unit will block calls from that
phone number in the future.
1
Press M CALL BLOCK N under the
situations shown above.
2
Confirm the call block number and press
M YES N .
R The call block number is stored in the
call block list, confirmation tone
sounds
*1 and “
Call blocked
” is
displayed, and then the call is
disconnected.
*1 Confirmation tones are used with
permission of © 2018 Copyrights Vision
Inc.
Note:
R If the call has no phone number, the call is
blocked but it is not stored in the call block
list.
R The call block feature is not available for
intercom calls or calls received by call
waiting.
R Blocked calls are logged in the caller list.
Storing unwanted callers
The unit can block calls by storing the desired
items in the call block list beforehand (Caller
ID subscribers only).
–
“
Single number
” : The unit blocks calls
from specific phone numbers stored in the
call block list.
– “
Range of numbers
” : The unit blocks
calls that begin with a number stored in the
call block list, such as a toll-free phone
number prefix or certain area codes.
– “
Block unknown CID
” : The unit blocks
calls that have no phone number.
Single phone numbers and ranges of numbers
can be stored in the call block list up to 1,000
items in total.
Blocking unwanted callers:
When a call is received, the unit will not ring
while caller information is being received
*1 .
If the caller’s phone number matches an entry
in the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1 If you want the first ring to sound, select
“
Yes
” in “Turning the first ring on/off”
(page 27).
Storing a single phone number
Important:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
Adding call blocked numbers from
the caller list
1
MCN CID
2
MbN : Select the desired entry to be
blocked.
R To edit the number: M MENU N a MbN :
“ Edit ” a M SELECT N
Press M EDIT N repeatedly until the
phone number is shown in the 10-digit
format.
a M SAVE N a MbN :
“
Call block/Unblock
” a
M SELECT N a Go to step 4.
3
M CALL BLOCK N
4
MbN : “
Yes
” a M SELECT N
5
Edit the phone number if necessary (24
digits max.).
a M SAVE N a M OFF N
Adding call blocked numbers
manually
1
M CALL BLOCK N
2
MbN : “
Single number
” a M SELECT N
3
M MENU N a MbN : “ Add ” a M SELECT N
26 For assistance, please visit http://shop.panasonic.com/support
Call Block