2
To exit, press
M
OFF
N
.
Telemarketing call block
In addition to Automated call block (page 28),
you can use Telemarketing call block to
further screen calls to stop telemarketer calls
from getting through.
Using this feature, you can ask callers to say
their names, and after checking the names,
you can decide whether to answer the calls or
not.
Note:
R
While screening calls, the call waiting
feature is unavailable (page 22).
Operating telemarketing call
block
1
During an outside call, lift the handset
and then press
M
TELE.BLK.
N
.
R
The unit prompts callers to say their
names.
2
To answer the call:
Press
M
TALK/
ZN
.
To block the call:
Press
M
CALL BLOCK
N
a
M
YES
N
.
R
The unit announces that the call will be
disconnected, and disconnects the call.
R
The caller will be registered to call
block list.
*1 The user can still answer the call after
pressing
M
CALL BLOCK
N
. To answer the
call, press
M
TALK/
ZN
.
Note:
R
If there is no response from the caller, and
the user does not press any keys in step 2
within 10 seconds, the unit will announce
that the call will be disconnected, and
disconnects the call.
R
While on the charger, the
M
TELE.BLK.
N
key
is not available. Lift the handset from the
charger to use this feature.
R
To use this feature, set the Auto talk feature
to
“
Off
”
.
One ring scam alert
The one ring scam alert feature notifies the
user when calling back a number that is
judged to be a scam call. This can help reduce
the risk of calling back expense international
numbers.
During an incoming call, if the caller
disconnect the call after 1 or 2 rings, the call is
judged to be a scam call. Depending on the
number of rings made before a call is
disconnected, a non-malicious call may also
be judged as a scam call. The default setting
is
“
1 or 2 rings
”
.
Note:
R
The call will not be judged as a scam call in
the following conditions:
– When a call is answered by pressing
M
TALK/
ZN
(page 21).
– When a call is screened by pressing
M
TELE.BLK.
N
(page 30).
– When a call is answered with Answer by
voice Command (page 25).
– When a call is blocked with the call block
feature (page 26).
– When automated call block is set to
“
Block
”
– When a call is answered by answering
system.
To use this feature, set the ring count for
the answering system to more than the
number of rings of the one ring scam
alert (page 54).
– When a call is answered by a voicemail
service.
To use this feature, set the ring count for
the voicemail service to more than the
number of rings of the one ring scam
alert (call your service provider)
(page 55).
– When the caller’s phone number
matches an entry in the phonebook
(page 32).
– When you do not subscribe to the caller
ID service.
– When the call is disconnected before
receiving caller ID information.
R
During call waiting, the unit cannot judge
whether the 2nd caller is a scam call.
30
For assistance, please visit http://shop.panasonic.com/support
Enhanced Call Block
