Panasonic KX-TG9541, Руководство по эксплуатации

Страница: 56 / 88

3
M YES N
4
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Playing back the greeting message
Handset / Base unit
1
For line 1: M MENU N#3031
For line 2: M MENU N#3032
2
MbN : Select the desired greeting message. a
M SELECT N
3
Proceed with the operation for your unit.
Handset: To exit, press M OFF N .
Base unit: To exit, press M EXIT N .
Listening to messages
using the base unit
When new messages have been recorded:
–
M N on the base unit flashes.
– “
New message
” is displayed.
For line 1: Press M N (PLAY1).
For line 2: Press M N (PLAY2).
R If new messages have been recorded, the base
unit plays back new messages.
R If there are no new messages, the base unit
plays back all messages.
Operating the answering system
during playback
Key Operation
MDN or MCN Adjust the speaker volume
M N
Repeat message
*1
M N Skip message
M PAUSE N Pause message
To resume playback, press
M N .
M n N (STOP) Stop playback
M ERASE N Erase currently playing message
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
Calling back (Caller ID subscribers
only)
Press MZN during playback.
R To edit the number before calling back, press
M EDIT N repeatedly until the phone number is
shown in the desired format (page 48).
R The unit automatically uses the line you set in
line selection mode (page 16) to call back.
When the line selection mode is set to
“
Auto
” ,
the indicated line ( or ) is used for the call.
If the indicated line is already being used or you
want to select the other line, press
M LINE 1 N or
M LINE 2 N .
R To call back using a cellular line, continue from
step 2, “Making cellular calls”, page 27.
Erasing all messages for the desired
line
1
M ERASE N
2
MbN : Select the desired line. a M SELECT N
3
MbN : “
Yes
” a M SELECT N
Listening to messages
using the handset
When new messages have been recorded, “
New
message
” is displayed.
1
To listen to new messages:
For line 1: M PLAY1 N
*1, *2
For line 2: M PLAY2 N
*1, *2
or
For line 1:
M MENU N#3231
For line 2: M MENU N#3232
To listen to all messages:
For line 1: M MENU N#3241
For line 2: M MENU N#3242
2
When finished, press M OFF N .
Note:
R To switch to the receiver, press M N .
*1 If there are no new messages in the
answering system, M PLAY1 N or M PLAY2 N is
not displayed.
*2 If there are new messages in both lines,
M PLAY N is displayed.
56 For assistance, please visit http://www.panasonic.com/help
Answering System for Landline
TG954x(en)_0528_ver011.pdf 56 2013/05/28 11:09:54