Panasonic KX-TG9541, Руководство по эксплуатации

Страница: 20 / 88

from the base unit. This feature allows the base
unit to try to reconnect the cellular phone at
regular intervals when it returns within base unit
range. You can set the interval. The default setting
is
“
1 min
” .
Program this setting using either the base unit or
one of the handsets.
Important:
R When you are using a cellular line or a
Bluetooth headset, the base unit loses its
connection from other Bluetooth devices
(cellular phone or headset). To automatically
resume the connection to cellular phones, leave
the auto connection on.
R Some cellular phones lose connection after
usage, please check the specifications of your
cellular phone for more details.
Handset / Base unit
1
M MENU N#632
2
MbN : Select the desired setting. a M SAVE N
3
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Note:
R Some cellular phones may ask you if you accept
the connection requirement from the base unit.
In that case, select
“
Off
” in step 2. Check the
specifications of your cellular phone.
Connecting/disconnecting the cellular phone
manually
If you will not be using the paired cellular phone’s
link to cell feature temporarily (for example, you do
not want the unit to ring when your cellular line
receives a call), you can disconnect your cellular
phone from the base unit. If you want to use it
again, reconnect the cellular phone to the base
unit.
Program this setting using either the base unit or
one of the handsets.
Note:
R Even if a paired cellular phone was
disconnected from the base unit, if it is brought
within the base unit’s range during the auto
connection interval, it may automatically
connect to the base unit (page 19).
R A disconnected cellular phone is not unpaired
from the base unit, so pairing it to the base unit
again is unnecessary.
Handset / Base unit
1
To connect/disconnect:
For CELL 1: M MENU N#6251
For CELL 2: M MENU N#6252
For CELL 3: M MENU N#6253
For CELL 4: M MENU N#6254
R A long beep sounds.
2
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
Cellular line selection
Handset
This feature determines which cellular line is
selected to make cellular calls when you press
M CELL N on the handset.
The following settings are available:
–
“
Manual
” (default): You can select the desired
cellular line when making a call.
– “Cellular phone 1”: CELL 1 is selected.
– “Cellular phone 2”: CELL 2 is selected.
– “Cellular phone 3”: CELL 3 is selected.
– “Cellular phone 4”: CELL 4 is selected.
1
M MENU N#634
2
MbN : Select the desired setting. a M SAVE N
3
M OFF N
Storing your area code (for dialing
only a 7-digit phone number to make
a local call)
You need to add your area code when making
cellular calls to a phone number in your area.
Once you store your area code, it is automatically
added to the beginning of the 7-digit phone
number when making cellular calls.
Program this setting using either the base unit or
one of the handsets.
Handset / Base unit
1
M MENU N#633
2
Enter the 3-digit area code.
R To correct a digit, press M CLEAR N .
3
M SAVE N
4
Proceed with the operation for your unit.
Handset: M OFF N
Base unit: M EXIT N
20 For assistance, please visit http://www.panasonic.com/help
Link to Cell
TG954x(en)_0528_ver011.pdf 20 2013/05/28 11:09:52