n
From the caller list:
1
MFN
( )
2
MbN
: Select the entry to be barred.
a
a
3
MbN
:
“
Caller Barred
”
a
4
MbN
:
“
Yes
”
a
a
M
N
n
By entering phone numbers:
1
(middle soft key)
#217
a
2
Enter the phone number (24 digits
max.).
a
R
To erase a digit, press
.
3
M
N
Viewing/editing/erasing bar call
numbers
1
(middle soft key)
#217
2
MbN
: Select the desired entry.
R
To exit, press
M
N
.
3
To edit a number:
a
Edit the phone number.
a
a
M
N
To erase a number:
a
MbN
:
“
Yes
”
a
a
M
N
Note:
R
When editing, press the desired dial key to
add,
to erase.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
(middle soft key)
#256
2
Enter the base unit PIN (default:
“
0000
”
).
R
If you forget your PIN, see page 49.
3
Select the handsets to be restricted by
pressing
1
to
6
.
R
All handsets registered to the base unit
are displayed.
R
“ ” is displayed next to the selected
handset numbers.
R
To cancel a selected handset, press
the same dial key again. “ ”
disappears.
4
5
Select a memory location by pressing
1
to
6
.
a
6
Enter the phone number or area code to
be restricted (8 digits max.).
a
a
M
N
R
To erase a restricted number, press
.
Changing the base unit PIN
(Personal Identification Number)
Important:
R
If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 49.
1
(middle soft key)
#132
2
Enter the current 4-digit base unit PIN
(default:
“
0000
”
).
3
Enter the new 4-digit base unit PIN.
a
a
M
N
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R
The additional handset model
recommended for use with this unit is noted
on page 5. If another handset model is
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
33
Programming
TG8151_61E(en)_1220_ver021.pdf 33
2011/12/20 18:50:48