n
When the smart function indicator
flashes rapidly, you can:
– Answer the call (outside call, intercom).
(page 19, 44)
– Stop the alarm sound. (page 31)
– Stop paging. (page 44)
n
When the smart function indicator
flashes slowly in standby mode, you can:
– Listen to new messages.
*1
(page 40)
– View the caller list when there are
missed calls. (page 37)
To activate these features, their Top key
setup must be “On”. (page 17)
*1 KX-TG8161 series: page 3
Using the smart function key
(Top Key)
When the smart function indicator flashes
rapidly/slowly, press
M
Smart function
N
.
R
The above features can be activated
depending the situation.
R
If you answer a call using the smart
function key, the speakerphone is activated.
R
Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages
*1
without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R
When the unit has new messages
*1
and
missed calls, the unit can be operated to
play the new messages first and then show
the missed calls.
*1 KX-TG8161 series: page 3
Note:
R
While key lock is on (page 21), incoming
calls can be answered, but the following
features are disabled even when the smart
function indicator flashes slowly.
– Listen to new messages.
*1
(page 40)
– View the caller list when there are
missed calls. (page 37)
*1 KX-TG8161 series: page 3
Setting the smart function key (Top
Key Setup)
The Top key setup for the following features
must be “On”.
–
“
New Message
”
*1
(Default: On)
–
“
Missed Call
”
(Default: Off)
The settings can be set for each handset.
*1 KX-TG8161 series: page 3
1
(middle soft key)
#278
2
MbN
: Select the desired setting and press
.
R
“ ” is displayed next to the selected
features.
R
To cancel a selected feature, press
again. “ ” disappears.
3
a
M
N
Note:
R
If the smart function indicator flashes when
the handset is not placed on the base unit
or charger, battery consumption is faster
than usual.
One touch eco mode
The
M
R/ECO
N
button on the handset enables
you to activate the eco function with one touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to
90 % in standby mode.
You can turn on/off one touch eco mode by
just pressing
M
R/ECO
N
. The default setting is
“
Normal
”
.
– When the one touch eco mode is on:
“
Low
”
is temporarily displayed and
is shown
on the handset display instead of
.
– When the one touch eco mode is off:
“
Normal
”
is temporarily displayed and
goes off from the handset display.
Note:
R
When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
R
Activating one touch eco mode reduces the
range of the base unit in standby mode.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
17
Getting Started
TG8151_61E(en)_1220_ver021.pdf 17
2011/12/20 18:50:45
