Erasing all messages
1
(middle soft key)
#325
2
MbN
:
“
Yes
”
a
a
M
N
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorised
parties from listening to your messages
remotely.
Important:
R
In order to operate the answering system
remotely, you must first set a remote
access code.
1
(middle soft key)
#306
2
To turn on remote operation, enter the
desired 3-digit remote access code.
3
a
M
N
Deactivating remote operation
Press
*
in step 2 on “Remote access code”
page 45.
R
The entered remote access code is deleted.
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts, enter
your remote access code.
3
Enter remote commands.
4
When finished, hang up.
Remote commands
Key
Operation
1
Repeat message
(during playback)
*1
2
Skip message
(during playback)
4
Play new messages
5
Play all messages
6
Play greeting message
7
Record greeting message
9
Stop recording
Stop playback
0
Turn answering system off
*4
Erase currently playing message
*5
Erase all messages
*6
Reset to a pre-recorded greeting
message (during greeting
message playback)
*#
End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 9 times.
R
A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
R
The greeting message is played back.
R
You can either hang up, or enter your
remote access code again and begin
remote operation (page 45).
45
Answering System
TG8151_61FX(en)_0323_ver011.pdf 45
2012/03/23 16:35:22
