Panasonic KX-TG7653AZ, Руководство по эксплуатации

Страница: 34 / 76

Sub-menu 1 Sub-menu 2 Settings Code
Set tel line
*3
Set recall
time
*1, *14, *15
0:
900 ms
1:
700 ms
2: 600 ms
3:
400 ms
4:
300 ms
5:
250 ms
G :
200 ms
#: 160 ms
6:
110 ms
7: <
100 ms
>
8:
90 ms
9:
80 ms
#121 23
Set line mode
*1, *16
1:
A
2: <
B
> #122 –
Privacy mode
*1 – 1:
On
0: <
Off
> #194 23
Repeater mode
*1 – 1: <
On
> 0:
Off
#138 57
Registration Register handset – #130 38
Deregistration
*2 – #131 39
Country
*1
– 1: <
Australia
>
2:
Newzealand
#136 38
*1 If you program these settings using one of the handsets, you do not need to
program the same item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only
available in direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed
(page 18).
*4 After the Bluetooth device is registered, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*8 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a
dial tone or no one on the line when you answer the call.
*9 The preset melodies in this product are used with permission of © 2009
Copyrights Vision Inc.
*10 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select
“
Caller ID auto
” . To turn this feature off,
select “
Manual
” . (Caller ID subscribers only)
To use this feature, set the date and time first (page 15).
*11 This tone lets you know when you receive an outside call while you are on
another line or an intercom call. If you select “ On ” , the tone sounds 2 times.
34
Programming
TG76xxAZ(en)_0207_ver012.pdf 34 2012/02/07 15:34:47