Useful Information
33
The handset stops working while
being used.
L
Disconnect the AC adaptor and turn off the
handset. Connect the AC adaptor, turn on the
handset and try again.
Pressing
{R}
does not
display/dial the last number dialled.
L
The redialled number was more than 24 digits long.
Redial the number manually.
The handset beeps intermittently
and/or
7
flashes.
L
Fully charge the batteries (page 8).
I fully charged the batteries, but
7
still flashes.
L
Clean the charge contacts and charge again (page
8).
L
It is time to replace the batteries (page 7).
I fully charged the batteries, but the
operating time seems to be short.
L
Wipe the battery ends (
S
,
T
) and the unit contacts
with a dry cloth.
Caller information is not displayed.
L
You must subscribe to Caller ID service.
L
Consult your service provider/telephone company.
L
Your unit is connected to a telephone line with DSL
service. We recommend connecting a filter (contact
your DSL service provider) to the telephone line
between the base unit and the telephone line jack.
While viewing caller information,
the display returns to standby
mode.
L
Do not pause for over 1 minute while searching.
I cannot register a handset to the
base unit.
L
The maximum number of handsets (6) are already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 26).
L
You entered the wrong PIN number. If you forget
your PIN, consult your nearest Panasonic service
centre.
L
Place the handset and the base unit away from
other electrical appliances.
Problem
Cause & solution
TG7100CX(e).book Page 33 Tuesday, May 23, 2006 9:02 AM